Drawbacks associated with the Molex connector * Expensive * May not be widely available * Cumbersome to remove since they do not lock into position using a latch. * They ease repairs since if the connector fails, it can easily be replaced. The 4-Pin Molex connector allows the use of.
#Pc power supply molex connector Pc
Benefits of the Molex connector * They make it easier to assemble different components. This Phobya power adaptor adapts 110v AC to 12v DC for your PC testing, such as initial filling and bleeding. As computer technology has advanced, so too has the Molex Mini-Fit Jr.
#Pc power supply molex connector how to
How to Install a Second SSD in Your Windows PC. PCIe: The PCI Express connector can be found in two modes, one with 6 pins (4+2) and the other with 8 pins.
This type of connector is thinner than molex, and has more contacts to supply power to SATA or newer hard drives and drives. This connector can feature twenty or twenty four different pins, depending on the age of the power supply and the motherboard it will connect to. Similarly, you can use a Molex adapter or SATA power cable splitter if youre out of SATA power connections. It is a more modern connector that is displacing the previous one. The largest of the Molex connectors on a computer power supply is known as the ATX connector, or the Mini-Fit Jr.
One computer can have several Molex connectors. The Molex connectors bring DC power to the drives inside a PC case. The Molex connector is used for power connections for a disk drive in a computer as well as for other computer components such as CD-ROM's, graphic cards etc. The terminal pins on the other hand are what conduct the current. The function of the housing is to hold the terminals and protect them from shorting, dust, dirt, moisture, and electrical interference. The connectors are capable of up to 10 amperes. The connector that provides power has female pins and a male housing while the connector that receives power has male pins and a female housing. COLOR FUNCTION Yellow 12 volts Black Ground Red 5 volts The connector is polarized and designed in a way that makes it difficult to plug it in incorrectly. The wires consist of a yellow wire, two black wires and a red wire. These shells can be arranged to support anywhere from two to fifteen circuits. The pins and the sockets on the ends of a Molex connector are held in place by nylon shells and aligned 5.088 mm apart in a sort of rectangular matrix depending on the application. One piece of the two piece pin and socket design consists of metal pins while the other piece consists of metal sockets. The connector has a nylon plug and receptacle consisting of a two piece pin and socket connection to which four wires are attached. While the power supply itself supports the +12 V, -12 V and +5 Vsb rails, the CONNECT converts this power to provide the +3.3 V and +5 V outputs from the +12 V rail. The Molex connector has a very simple design.
0 kommentar(er)
